Home > Home >

Meritor MTC4210XL Transfer Case
Meritor MTC4210XL Transfer Case
 
Alternative Views:
MTC4210XL Transfer Case
List Price: $0.01
Our Price: $1.00
Sale Price: $0.01
CONDITION: New


Availability: Usually Ships in 3 to 5 Business Days
Product Code: 2804-MTC4210XL
No longer available - Call for replacement

Description
 
Meritor MTC4210/MTC4210XL is a two speed, four shaft transfer case with oil pump Meritor. Navistar International Truck part numbers 3824765C91 and 3824765C91L. The MTC-4210 is designed specifically for use in 4x4 vehicles with low entry single rear axles. It runs great with the Meritor MX-120 series front drive axles and MS-145/160 series of single rear drive axles by providing optimized drive-line positions. Ask us for more details on that setup! The XL line has a large sump capacity and improved cooling and lubrication system to optimize oil to main bearings and other key areas. The MTC-4208XL and MTC-4210XL transfer case models can also be equipped with an aftermarket PTO by using PTO Kit 2540 and Pump Conversion Kit 2831.

Rebuilt Meritor MTC-4210XL comes with a 1 year warranty. Rebuilt units will have to be quoted as prices very. All transfer cases are sold exchange. Core charges will apply and may be refunded in whole or in part upon delivery and inspection. Unit will be subject to manufacturer's core policy unless otherwise stated in writing.

We offer new, used, and rebuilt Arvin Meritor transfer cases. We also offer parts and repair services on your existing unit. We can pick it up from anywhere, repair it and send it back from you. Give us a call today!

Due to the many configurations of this unit, we will need the following information to quote you the correct unit:

Please provide the following information from the Data Tag located on your transfer case:

You can send a clear picture of the data tag or fill in the below information and send it to us.

Model Number ___________________________

Cust number:____________________________

Serial number: ___________________________

Ratio: __________________________________

Your Data Tag should look like this:





Freight: All heavy packages are shipped via truck freight best way unless customer requests otherwise. You can contact us with your shipping requirements and instructions.
Freight Quote available upon request. Please contact us with your shipping address.





Standard Features

  • Internal oil pump featuring seal-ring technology for improved oil flow during extended high-speed runs
  • Ground helical gearing in high and low ranges
  • Integral front axle declutch; air-actuated
  • Three-position range shifting with neutral; air-operated in all three positions
  • Unitized shaft seals
  • Factory-filled, full synthetic lube
  • High temperature O-rings on all shifting pistons
  • Various yokes available
  • Provision for oil-temperature sensor
  • Power take-off (PTO) ready
  • Rear-mounted power take-off (PTO)
  • Speed sensor
  • Front axle declutch engagement and/or disengagement switches
  • Oil-cooler ready

Typical Applications
  • Utility vehicles
  • Snow plows
  • Block trucks
  • Oil drillers
Technical Specifications

Torque Rating
High Range
Low Range

9,750 Lbs.-ft
5,000 Lbs.-ft
Speed Rating
2,850 RPM (3,515 RPM with Oil Cooler)
Dry Weight
630 Lbs
Available Ratios
High Range
Low Range

1:1
2.05:1
Input to Output drop
Front Output
Rear Output

9 inches
9 inches
Input to Output Offset
Front Output
Rear Output

11.14 inches curbside
2.75 inches curbside

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Home


Axletech Meritor .75-10 2b P/N: 13X116
Axletech Meritor .75-10 2b P/N: 13X116
$0.01